The gravity bong is a smoking device that uses the force of gravity to help you smoke weed. It’s not as simple as it may sound, though, and there are two schools of thought on how to make one.

One school says don’t bother with making a gravity bong because you’ll mess up your pipes. The other school says you can build a gravity bong using pipe-building techniques and tools. Let’s take a look at both sides of this debate and see what happens when you try to use gravity to get high.

What Is a Gravity Bong?

A gravity bong is essentially a water bowl attached to a glass tube. When you fill the bowl with water and place it on the ground, the weight of the water creates a vacuum inside the glass. That means the air inside the glass will be sucked out, and the vacuum will suck in any smoke. Once the smoke is inside the glass, you simply blow into the bottom of the glass to draw the smoke through the glass and into the bowl.

This method has several advantages over the standard methods of smoking marijuana. For starters, the water level isn’t critical. If you pour too much water in the bowl, you won’t get high. If you pour too little, you aren’t going to get any smoke. It also takes less effort than pulling a lighter from your pocket and lighting up.

Some people have reported getting stoned just by breathing through the glass while holding it. This is possible, but it’s very hard. And if you do manage to get some smoke in your lungs, it’s likely to quickly burn your throat and cause coughing fits.

For smoking a bong, there are certain things needed such as bud of cannabis, water, ice cubes which is optional, bong water pipe and grinder. You need to mix all these things for preparing the Best Bongs. The smoke coming out from the bong is visible in the form of a cloud. More often, a bowl is used for mixing all the things together.

How Much Water Do You Need for a Gravity Bong?

Before we dig into actually building a gravity bong, let’s talk about how much water is required. A good rule of thumb is to set your bowl’s water line to just below the top of the glass. Then fill the bowl until the water starts to flow out of the bottom of the glass.

If you’re using a regular glass water pipe, the amount of water you need should be close to 2 cups (1/4 liter). However, if you’re using an e-cigarette, which does more of its work inside a plastic chamber, then you might want to start off with 4 cups (1 liters) of water.

In either case, once you’ve poured enough water into the bowl so that it flows out of the bottom of the glass, you have the perfect setup for a gravity bong.

Should You Build Your Own Gravity Bong?

If you choose to go down the DIY route, then you’ll need to build a gravity bowl. There are many different ways to build a gravity bowl, but most of them require you to buy a specific piece of equipment. Most people who prefer to make their own gravity bongs tend to avoid buying specialized pieces of gear unless they absolutely have to.

Here are a few options for building your own gravity bong.

Option 1: Use a Soda Bottle

You could always use a soda bottle instead of a bowl to hold water. To create a gravity bowl, all you have to do is cut a hole in the bottom of the soda bottle large enough for your joint to fit through. Then you just put the soda bottle on the ground and fill it with water. As long as you keep the water flowing out of the bottom of the bottle, you’ll have a gravity bowl ready to go.

Option 2: Use a Cup

Another way to create a gravity bowl is to use a cup. First, you’ll need a clean cup. You can use a paper coffee cup, or you can use a ceramic or metal mug. You’ll also need a funnel. A funnel is a small, narrow tube that’s designed to direct liquid into another container. You can find funnels in various shapes and sizes, but you probably don’t need anything fancy.

Next, you need to fill your cup with water. Place the funnel directly onto the rim of the cup. Fill the cup with water, and then place the funnel back on the rim of the cup. Now you know why you needed a funnel in the first place!

Once you’ve got the funnel back on the rim of the cup, attach your joint to the stem of the plant. Then, gently pour water into the cup until the water begins to flow out of the rim. Once the water starts to flow out, you can remove the funnel and enjoy your gravity bowl. Just remember to refill your cup each time you use it.

Option 3: Use a Bowl With a Hole Cut Into It

Another way to build a gravity bowl is to simply use a bowl with a round hole cut into it. To do this, you’ll need a bowl and a pair of scissors. Take a deep breath before snipping through the center of the bowl. Don’t worry about ruining the bowl — you’ll be able to throw it away later.

Now you just have to figure out where you’re going to place the bowl. Since you already have a hole cut into the bowl, it doesn’t matter where you place the bowl on the ground; you’ll still end up with a gravity bowl.

There are a couple of other ways to build a gravity bowl, but these three options seem like the easiest. You can also watch our video above for more information.

Should You Buy a Gravity Bong?

Building a gravity bowl is relatively easy, but it takes a lot of patience. If you’re looking for a quick fix, then building a gravity bong might not be for you.

However, if you want to spend more money, you can purchase a gravity bong made specifically for recreational purposes. Here are a couple of choices:

• GravityBong
• GlassWaterPipe

These products are pretty expensive. For example, the GravityBong costs $100, and the GlassWaterPipe goes for $80. But the GravityBong comes with a lifetime warranty, and the GlassWaterPipe comes with a lifetime warranty. Both companies stand behind the products they sell.

These gravity bongs are built to last, and unlike homemade gravity bowls, they’re extremely durable. These products come with instructions and everything you need to get started. They also provide detailed instructions for using the products, so even a beginner can use them successfully.